There are few things more frustrating in competition shooting than missing shots you know you should make.
I learned that lesson the hard way during the 2025 Tactical Games Iowa Regional. The stage called for hits at 480 yards, and I was struggling badly. Shot after shot missed. At first, I questioned my fundamentals. Was I rushing? Was my position off? Was I reading the wind poorly?
Then I found the real problem.
My LPVO had movement inside the scope rings. The mount had loosened during the event.
That moment changed the way I look at optic mounting systems.
When you are competing in The Tactical Games, shooting 2-Gun, hunting, or trusting your rifle for duty use, your optic mount cannot fail. Your mount is the foundation of your entire aiming system. If it shifts, everything shifts.
After that event, I switched to the American Defense Manufacturing AD-Delta-C Cantilever Mount, and since then, it has survived thousands of rounds, multiple Tactical Games events, rough travel, barricades, and hard use without a single issue.
That is why this review matters.

AAmerican Defense Manufacturing: Built for Hard Use
American Defense Manufacturing has earned a strong reputation inside the firearms community for one reason: reliability.
From ambidextrous rifles to optic mounting systems, ADM produces equipment designed for serious shooters. Their products are built for competitors, law enforcement, military personnel, hunters, and responsible armed citizens who demand gear that performs under pressure.
One thing I appreciate about ADM is they do not build products that simply look tactical. They build equipment designed to survive abuse.
Over the past season, I tested the following ADM products through:
- 3 Tactical Games Regional Events
- 3 Tactical Games Skirmish Events
- Multiple 2-Gun matches
- Hundreds of training sessions
- Thousands of rounds fired
This was not a light review cycle. This was real-world testing under stress, fatigue, dirt, impacts, and constant movement.

ADM AD-Delta-C Cantilever Mount: Stability Under Pressure
ADM AD-Delta-C Cantilever Mount has been running on my rifle paired with an EOTech Vudu 1-10 since the Iowa Regional.
Since installing it:
- Zero has remained locked in
- The rings have never loosened
- The mount has maintained excellent return-to-zero
- The levers have stayed secure
- The optic has never shifted
That matters when your rifle is constantly getting beat up during Tactical Games stages.
Between barricades, tank traps, rope climbs, dump barrels, and traveling inside rifle cases, competition rifles take abuse. Cheap mounts eventually reveal weaknesses. The ADM mount never did.

Patented QD Auto Lock™ Lever System
This is easily one of my favorite features ADM offers.
The QD Auto Lock™ Lever System allows fast attachment and removal without tools while still maintaining a rock-solid lockup.
A lot of quick detach systems feel loose or require constant adjustment. ADM’s system feels secure and repeatable.
Need to remove the optic?
- Flip the levers
- Remove the optic
- Reattach it
- Maintain zero
Simple. Fast. Effective.
That matters whether you are:
- Traveling with your rifle
- Cleaning your setup
- Swapping optics
- Running backup systems

Machined for Durability
The AD-Delta-C is precision machined from 6061-T6 aluminum and finished with a hard coat T3 Mil-Spec anodize.
Translation?
It is built to survive hard use.
Even after thousands of rounds and rough handling:
- No finish failures
- No hardware backing out
- No bending
- No shifting
- No loss of zero
It sports an MSRP of $317.57, which is on the higher end for a Cantilevered mount. However, it is worth the investment because you won’t need to buy another one. I did spend my own money to buy the mount and got it for $250.00, so you can find them on sale too.
ADM 45-Degree RMR Offset Mount: Fast Transitions Matter
In Tactical Games and 2-Gun competition, transitions matter.
There are moments when an LPVO is perfect—and moments when a red dot is faster.
That is where the ADM Trijicon RMR 45 Degree Offset Mount comes in. With an MSRP of $165.43 Which is a common retail price for 45-degree offset mounts.
I reached out to ADM after my positive experience with the AD-Delta-C, and they told me exactly what you want to hear from a company:
“Run it hard and let us know what you think.”
That confidence says a lot.

Performance Across Multiple Optics
One thing I appreciated immediately was the flexibility.
ADM offers multiple footprint options, including:
- RMR
- DeltaPoint Pro
- Aimpoint
I chose the RMR footprint because I have been testing several optics this season, including:
- Holosun
- Cyelee
- Trijicon
- ZULISY
Fitment with Holosun and Trijicon optics was excellent.
I did notice slight movement with the Cyelee Wolf initially, but swapping to Vortex screws solved the issue completely.
Real-World Competition Performance
The offset mount held up exactly like the cantilever mount:
- No loss of zero
- No loose hardware
- No lever failures
- No shifting during movement
Even after multiple competitions and thousands of rounds, it continued performing exactly as expected.
One thing worth noting:
If you run an LPVO with an offset dot, you need rail space.
This setup works exceptionally well on a 16-inch rifle, but shooters with shorter rail setups may run into fitment limitations.
Installation and Fitment
Installation for both mounts was straightforward.
The tool-less QD levers make setup easy and eliminate the need for constantly digging through your range bag for tools.
What I Liked
- Fast installation
- Easy removal
- Excellent lockup
- Consistent fit across rifles
- Easy optic adjustment access
Nothing complicated. Just functional.

On the Range: Tested the Way Gear Should Be
A lot of gear reviews happen from a bench.
This one did not.
These mounts were tested:
- Under elevated heart rate
- During physical exhaustion
- Through awkward shooting positions
- Around barricades and obstacles
- In dirt, dust, and weather
At one point, my rifle even tipped over off a table during an event.
The result?
- No shift in zero
- No movement
- No damage
That is what confidence looks like.

Durability That Matches the Mission
ADM designed these mounts for hard use, and it shows.
After a full season:
- The finish still looks great
- The levers remain solid
- The mounts have stayed secure
- No components failed
For competition shooters, durability matters because failure usually happens at the worst possible time.
ADM understood that assignment.
Strengths and Limitations
ADM AD-Delta-C Cantilever Mount
Strengths
- Excellent durability
- Outstanding return-to-zero
- Secure optic retention
- Stable platform for LPVOs
- QD Auto Lock™ Lever System
- Great eye relief positioning
- Easy installation and removal
Limitations
- Slightly heavier than minimalist mounts at approximately 8 ounces
- It is on higher side for cost at $317.57

ADM Trijicon RMR 45-Degree Offset Mount
Strengths
- Durable construction
- Maintains zero extremely well
- Fast transitions between optics
- QD Auto Lock™ Lever System
- Excellent machining and fitment
Limitations
- Requires adequate rail space
- Needs approximately ½-inch clearance under the optic setup
Faith, Pressure, and Performance
One thing competition constantly reminds me of is this:
Pressure exposes weaknesses.
Not just in gear—but in us.
That is true in shooting, training, and life.
The Tactical Games has a way of exposing flaws quickly. Weaknesses show up under fatigue and stress. But that is also where growth happens.
Faith works the same way.
God often uses pressure to refine us, sharpen us, and teach us dependence on Him rather than ourselves.
Reliable gear matters. Strong training matters.
But character matters more.

To Make a Long Story Short
After thousands of rounds, multiple Tactical Games events, skirmishes, and countless training sessions, the ADM AD-Delta-C Cantilever Mount and ADM Trijicon RMR 45-Degree Offset Mount proved themselves.
No loss of zero.
No broken hardware.
No failures.
Just dependable performance.
ADM’s QD Auto Lock™ Lever System remains one of my favorite mounting solutions on the market because it combines speed, simplicity, and reliability in one package.
Whether you are a competitor, hunter, law enforcement officer, or everyday rifle owner, these mounts are built to handle abuse and continue performing when it matters most.
I also want to thank American Defense Manufacturing for allowing me to test the Trijicon RMR 45-Degree Offset Mount this season.
The gear held the line.
And that matters.


Leave a Reply